2.2KVA Petrol Generator

• Air filters replaced
• Spark plug replacement
• Pull cord replacement
• Adjust engine & blade shaftspeed
• Check/adjust recoil starter assembly
• Check/adjust carburettor
• Check/adjust drive belt
• Clean engine cooling ports
• Check/clean fuel tank filter
• Lubricate bearings & pivot points
• Check blade guard & flanges

• Spark plug replacement
• Pull cord & air filter replacement
• Oil change & check oil alert system
• Check/adjust carburettor
• Check/adjust tappets
• Clean engine & alternator cooling ports
• Check/clean fuel tank & lines
• Lubricate bearings & pivot points
• Adjust voltage output (OFF & ON load)
• Check/inspect electrical sockets
• Check fuses or operation of circuit breaker

Medium-Duty Breaker

9" Angle Grinder

• Blow out dust from motor
• Replace carbon brushes
• Replace piston seals & inspect con rod assembly
• Replace anvil seals & inspect anvil
• Replace tool dust seal
• Inspect plug, cable & switch
• Inspect chuck, nose piece & retaining latch
• Re-grease / oil

• Replace carbon brushes
• Re-grease gears & bearings
• Inspect plug & cable
• Check switch operation
• Inspect/adjust cutting guard
• Inspect blade spindle & locking device
• Check spindle speed
• Clean motor/gearbox cooling ports